Table of Contents
Advertisement
9. Remove the former plate (Pos. 2, former shaft overview).
10.
Remove the compactor unit (Pos. 4. overview).
11.
Finally, remove the conveyor belt unit (Pos. 6, overview) so that you can clean the belt (Pos. 18,
belt overview). To be able to remove it, first extract the two knobs (Pos. 13 chassis overview) that
hold it in place. Once removed from the machine, fold the belt chassis to remove the belt.
Image 22, Removing knobs
Image 20. Removing former unit
Image 21. Removing compactor unit
-16-
Image 23, Disconnecting belt from power
Advertisement
Table of Contents
