6. Remove the vanes (Pos. 9, tank overview), loosening the shaft screw (Pos. 13, tank overview) by
turning it clockwise.
Image 13, Removing safety screw
7. Extract the 3 knobs (Pos. 14, tank overview) from the machine and remove the protection (Pos. 8,
various overview).
Image 15, Tank base knobs
8. Next disassemble the base of the tank (Pos. 3, tank overview). The knurled nut must first be
removed from the former plate (Pos. 6, former shaft overview).
Image 18. Removing former plate knurled nut
Image 16, Lifting ramp supporting knob
-15-
Image 14, Removing vanes
Image 17, Removing protection
Image 19, Removing tank base