Daikin CO2 Conveni-pack LRYEN10A7Y1 Installer And User Reference Manual page 16

3 | Specific installer safety instructions
Installer and user reference guide
16
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
WARNING
ALWAYS use multicore cable for power supply cables.
WARNING
Use an all-pole disconnection type breaker with at least 3 mm between the contact
point gaps that provide full disconnection under overvoltage category III.
WARNING
If the supply cord is damaged, it MUST be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
INFORMATION
A wiring diagram can be found on the applicance and its description of the
connections and wiring to external control devices and supply cord can be found in
"26.4 Wiring diagram: Outdoor
INFORMATION
The method of connection of the appliance to the electrical supply and
interconnection of separate components is described in
4
Overview" [ 89].
INFORMATION
Details of type and rating of fuses, or rating of circuit breakers are described in
"17 Electrical installation" [ 4 88].
4
unit" [ 134].
"17.2 Field wiring:
LRYEN10A7Y1+LRNUN5A7Y1
CO₂ Conveni-Pack outdoor unit
4P605460-1 – 2020.08