How Do I Power Off Server Units And Additional Units - Fujitsu BS2000 SE Series Manual

Powering on, starting up BS2000, powering off

3.7 How do I power off Server Units and additional Units?

Shutting down the Server Unit or immediately powering it off
Requirement
Logging in as administrator, B2000 administrator or operator
The Unit is powered on (Power status displays the value ON).
i
In case of an SU /390, an existing connection to the hardware interface is required.
Procedure
In the Units table of the desired SU click the Power Off icon:
Ê
In the dialog box which then appears, select the option Shut down or Power off
Ê
immediately and confirm the action with Execute. When shutting down, the BS2000
systems on the SU x86 are shut down gracefully and the system waits for termination,
if configured.
i
The Server Unit is shut down or powered off immediately.
U41857-J-Z125-2-76
The possible actions depend on the situation and unit. If no action is possible,
the tooltip shows the reason.
Only Power off immediately is available for the SU /390. In this case shut down is
possible only via the BS2000 console (see
console?" on page 25).
Powering off Server Units
section "How do I open a BS2000
27