Installing A Memory Module - Hitachi DS240 Service Manual

I H
NSTALLING THE ARDWARE
6. Hold the DIMM module by the ends and remove it from the system. Place the DIMM
module in an antistatic packaging.
A

Installing a Memory Module

CAUTION!
!
H
ANDLE THE MEMORY MODULE BY THE EDGES AT ALL TIMES
1. Locate the DIMM slot to populate and open the ejector levers (A) at both ends of the
DIMM slot.
2. Align the notch on the DIMM module with the protrusion on the slot.
3. Press down on both corners of the DIMM module until the ejector levers lock in
place.
A
4. Install the repeater module. See Installing a Repeater Module on page 2-28.
Figure 2-58. Removing a Memory Module
notch
protrusion
Figure 2-59. Installing a Memory Module
I
NSTALLING A
A
.
A
M M
EMORY ODULE
2-47