Installing A Sas Mezzanine Card - Hitachi DS240 Service Manual

I H
NSTALLING THE ARDWARE
6. Replace the SAS mezzanine card.

Installing a SAS Mezzanine Card

1. Remove the mainboard sled. See Removing a Mainboard Sled on page 2-11.
2. Remove the riser assembly. See Removing a PCIe Riser Assembly on page 2-14.
3. Remove the SAS mezzanine card assembly. See Removing the SAS Mezzanine Card
Assembly on page 2-21.
4. Install the SAS mezzanine card to the riser card.
5. Fasten the five screws securing the SAS mezzanine card assembly to the SAS
mezzanine card bracket.
Riser Card
❸
6. Align the screw holes on the bracket over the corresponding screw holes on the
mezzanine card.
7. Lower the mezzanine card to install in place.
❸
❶
❸
Figure 2-30. Install a SAS Mezzanine Card
I
NSTALLING A
❸
❸
SAS Mezzanine Card
❷
SAS Mezzanine Card
Bracket
SAS M C
EZZANINE ARD
2-24