BIOS
Unzip the release package to the same folder in the HDD.
Open Terminal in the release package folder, or change to the folder with release
package located.
Execute batch file "BIOS_lnx64.sh" to update BIOS.
Execute batch file "ME_lnx64.sh" to update ME FW.
After the update complete, perform a DC cycle, the new BIOS/ME FW runs.
Then, enter setup, and press <F9> to load defaults, and save before any test run.
F
U
I
IRMWARE
PDATE
NSTRUCTIONS
4-24