Table of Contents
Advertisement
I
H
NSTALLING
ARDWARE
3. Pull the right side of the bezel outward until it has cleared the chassis. Do not con-
tinue to rotate the bezel to prevent the guide hooks on the left side of the bezel
from breaking on the mounting ear.
Figure 2-65. Rotating the Bezel to an Open Position
4. Slide the bezel out at an angle to remove it. If necessary, press the Lever to the right
to set it in its default position.
Figure 2-66. Removing the Bezel
R
B
EMOVING A
EZEL
2-52
Advertisement
Table of Contents
