INTERMITTENT IGNITION
TO USE WITH LINE VOLTAGE THERMOSTAT JUMPER TERMINALS T T AND ADO THERMOSTAT AS SHOWN
AT 1 IN SERIES WITH LIMIT CONTROL.
3.12 ABOVE
TO DETERMINE THE AIR TUBE LENGTH
The Air Tube Length (Dim. A) is the distance from the front
of Air Tube Retainer Flange to the face of Air Cone. Note
adjustable flange width.
GUN SETTING INSTRUCTIONS
(For EHA and EH Burners only)
Suggested start-up setting: EHA Flamelock™ flush with
cast iron cone face. EH Flamelock™ 1/8" ahead of cast
iron cone face for 3.00 to 4.50 GPH or 1/4" ahead for
5.00 to 6.00 GPH.
6
24 V ROOM
THERMOSTAT
FIGURE 1
FIGURE 2
FIGURE 5
INTERRUPTED IGNITION
FIGURE 3
FIGURE 4
GUN SETTING INSTRUCTIONS
(For EHASR Only)
FIGURE 6
24 V ROOM
THERMOSTAT