General Titanium Series Instruction Manual page 6

USING YOUR OPTICAL LEVEL
SET UP
• S tand the tripod (part sold separately) on a level
surface with legs spaced for stability.
• T hread the tripod yoke through the 5/8" x 11
thread on the base of the instrument. Screw into
place until secure.
• Centre the bubble vial by turning the levelling
screws.
6
OPERATION
• Point the instrument towards the desired area.
• Use a bright background or hold a white sheet of
paper in front of the area. Turn the eyepiece until
the cross hairs are a sharp black.
• Turn the level towards the staff using the optical
view guide.
• Turn the panning screw to set the vertical hair
down the centre of the staff.
Measurement
• Read the staff where it is cut by the middle hair.