Completing The Installation; In Windows 3.1 - Adaptec SlimSCSI APA-1460 Installation Manual

6
Be sure that at least one of the external SCSI devices
provides termination power (
SCSI bus or that the last device on the bus supplies
termination power to itself.
The SlimSCSI adapter does not provide termination
power, because it would need to draw this power
from the portable PC's battery. The SCSI devices will
not operate correctly unless at least one device pro-
vides termination power.
7
Be sure that each SCSI device has a unique SCSI ID,
ranging from 0 to 6. (The SlimSCSI adapter uses SCSI
ID 7.)
SCSI IDs on most SCSI devices are set with jumpers
or switches. See the device documentation for more
information.
Your SlimSCSI adapter and SCSI devices are now
installed. Next, you need to install the drivers and other
software. To do this, continue with the following section,

Completing the Installation.

4
) to the
TERMPOWER
Completing the
Installation
Turn to one of these sections to install software for the
operating system you are using on your PC:
Completing the Installation in Windows 3.1 below
Completing the Installation in Windows 95 on page 5
Completing the Installation in Windows NT on page 6
Completing the Installation in OS/2 on page 7
Completing the Installation in
Windows 3.1
Note:
If your PC is running Windows 3.1, the
CardWizard Pro software must already be
installed before you install Adaptec EZ-SCSI. If
you have not already done this, see Installing
CardWizard Pro on page 2.
1
Insert the SlimSCSI adapter in a slot, connect the
CD-ROM drive to it, and turn the drive
Be sure the CD-ROM drive is terminated, if it is the last
SCSI device on the bus.
2
Start Windows 3.1 on your PC.
3
Insert the Adaptec EZ-SCSI 4.0 Setup Diskette in the
floppy disk drive.
4
Select File/Run from the Program Manager menu.
5
When the Run dialog box appears, type a:\setup (or
b:\setup if you are using the B drive) and click OK.
6
Follow the instructions that appear on the screen.
7
When Adaptec EZ-SCSI is installed, continue with
Using the SlimSCSI Adapter on page 8.
.
ON