Miele KM 5621 Operating And Installation Instructions page 46

Installation
Connection
 Ensure that the connection data on
the data plate (voltage, frequency,
and fuse rating) match those of your
electrical supply.
The data plate is located underneath
the cooktop.
The cooktop is approved and ready for
connection to a grounded connector
with three connecting wires, sheathed
by a flexible metal hose.
It must be connected to an assigned
line in an approved connecting socket.
The appliance must be able to be dis-
connected from the power supply on all
poles by disconnecting devices! (When
turned off, a contact distance of at least
¹/₈" (3 mm must be present!) The dis-
connecting devices are overcurrent pro-
tection elements and protective circuit
breakers.
Black: Connect to L1 (hot)
Red: Connect to L2 (hot)
Green: Connect to GND (ground)
KM 5621
208 V, 60 Hz, 40 A
240 V, 60 Hz, 30 A
KM 5624
208/240 V, 60 Hz, 40 A
KM 5627
208/240 V, 60 Hz, 50 A
46
Make sure that the connecting socket is
accessible after the installation of the
cooktop.
Further information can be found on the
included data plate.

WARNING:
THIS COOKTOP MUST BE
GROUNDED