Miele KM 5621 Operating And Installation Instructions page 44

Installation
Granite and marble countertops
You will need heavy-duty double-sided
adhesive tape (not included with the
cooktop) to fasten the spring clamps.
 Attach the adhesive tape  along the
top edge of the cut-out in the posi-
tions shown in the cooktop illustra-
tion.
 Position the spring clamps on the top
edge of the cut-out and press them
firmly into place.
 Coat the side edges and the lower
edges of the spring clamps with sili-
cone.
44
Installing the cooktop
 Feed the appliance power cord down
through the counter cut-out.
 Position the cooktop in the counter
cut-out.
 Using both hands, press down evenly
on the sides of the cooktop until it
clicks into position. When doing this
make sure that the seal of the appli-
ance sits flush with the countertop on
all sides. This is important to ensure
an effective seal all round.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum 3/16" (≤ R4/ 4 mm),
can be carefully filed down to fit.
Do not use any additional sealant
(e.g. silicone).
 Connect the cooktop to the electrical
power supply.
 Check that the cooktop works.
The cooktop can only be removed us-
ing a special tool.