Specifications; Plug Configurations; Electrical Rating Charts - Hatco HDW Series Installation And Operating Manual

English

Plug Configurations

Freestanding units are supplied from the factory with an
electrical cord and plug installed. Plugs are supplied according
to the application.
WARNING
ELECTRIC SHOCK HAZARD: Plug unit into a properly
grounded electrical receptacle of the correct voltage,
size, and plug configuration. If plug and receptacle do not
match, contact a qualified electrician to determine and
install proper voltage and size electrical receptacle.
NOTE: The specification label is located on the back of
freestanding models and the inside left panel of built-in
models (remove bottom drawer to view label). See label for
serial number and verification of unit electrical information.
Electrical Rating Chart — HDW-x Models
Model Voltage
HDW-1
HDW-2
HDW-3
HDW-4
Electrical Rating Chart — HDW-xN Models
Model Voltage
HDW-1N
HDW-2N
HDW-3N
NOTE: Shipping weight includes packaging.
Form No. HDWM-0121
Watts
120
208
450
240
120
208 900
240
120
208 1350
240
120
208 1800
240
Watts
120
208
450
240
120
208 900
240
120
208 1350
240
NEMA 5-15P
NOTE: Receptacle not supplied by Hatco.
Amps Plug Configuration
3.8 NEMA 5-15P
2.2
NEMA 6-15P
1.9
7.5 NEMA 5-15P
4.3
NEMA 6-15P
3.8
11.3 NEMA 5-15P
6.5
NEMA 6-15P
5.6
15 NEMA 5-15P
8.7
NEMA 6-15P
7.5
Amps Plug Configuration
3.8 NEMA 5-15P
2.2
NEMA 6-15P
1.9
7.5 NEMA 5-15P
4.3
NEMA 6-15P
3.8
11.3 NEMA 5-15P
6.5
NEMA 6-15P
5.6
5

SPECIFICATIONS

NEMA 6-15P
Plug Configurations
Shipping Weight
97 lbs. (44 kg)
168 lbs. (76 kg)
232 lbs. (105 kg)
296 lbs. (134 kg)
Shipping Weight
83 lbs. (38 kg)
168 lbs. (76 kg)
232 lbs. (105 kg)