Installing On Openserver; Installing On Solaris - Adaptec RAID 3085 Installation And User Manual

At the Additional Driver Options menu, select Modify, then press Enter.
6
If aacraid.ham has already been detected, delete it.
7
At the Driver Name menu, press the Insert key.
8
Insert the driver disk, press the Insert key, then press F3.
9
At the A:\ prompt, press Enter.
10
The driver installs.
At the Additional Driver Option menu, select Return to driver summary, then press Enter.
11
At the Driver type menu, select Load on Additional Driver Options.
12
After the driver loads, select Continue.
13
Continue with
14

Installing on OpenServer

To install the driver on OpenServer:
Start your computer, then insert the driver disk.
1
Begin the driver package installer:
2
pkgadd -d diskette1
At the installer prompt, type
3
Select 1 for the aacraid package.
4
When the installation is complete, select q to quit the installer.
5
Reboot your computer and remove the driver disk.
6
Continue with
7

Installing on Solaris

To install the driver on Solaris:
Start your computer.
1
Insert and mount the driver disk:
2
volcheck
Change to the driver installer directory:
3
cd /floppy/floppy0/DU/sol_210/i86pc/Tools
Start the driver installer:
4
./install.sh -i
Reboot your computer, then remove the driver disk.
5
Continue with
6
Chapter 8: Installing the Driver on an Existing Operating System
Managing Your Storage Space on page
.
go
Managing Your Storage Space on page
Managing Your Storage Space on page
61.
61.
61.
58
●