Installing With Unixware; Installing With Vmware - Adaptec RAID 3085 Installation And User Manual

Installing with UnixWare

Note:
You will need your UnixWare Installation CD to complete this task.
To install the driver when installing UnixWare:
Insert the UnixWare Installation CD.
1
Restart your computer.
2
Follow the on-screen instructions to begin the UnixWare installation.
3
When prompted to load more HBA drivers, insert the driver disk, then select Yes. (To load
4
more HBA drivers, repeat this step.)
When all drivers have loaded, select No.
5
Complete the UnixWare installation, following the instructions included with your
6
operating system.
Continue with
7

Installing with VMware

Note:
You will need your VMware Installation CD to complete this task.
To install the driver when installing VMware:
Insert the VMware Installation CD.
1
Restart your computer.
2
Follow the on-screen instructions to begin the VMware installation.
3
Note:
The VMware embedded driver will see the device and install.
Complete the VMware installation, following the instructions included with your
4
operating system.
Note:
Currently, Adaptec Storage Manager is not supported on VMware. To create and manage
arrays, use the
Chapter 7: Installing the Driver and an Operating System
Managing Your Storage Space on page
ARC
utility. See page 63 for more information.
61.
53
●