Installing With Unixware; Installing With Solaris - Adaptec RAID 2405 Installation And User Manual

When all drivers have loaded, select No.
5
Complete the OpenServer installation, following the instructions included with your
6
operating system.
Continue with
7

Installing with UnixWare

Note:
You will need your UnixWare Installation CD to complete this task.
To install the driver when installing UnixWare:
Insert the UnixWare Installation CD.
1
Restart your computer.
2
Follow the on-screen instructions to begin the UnixWare installation.
3
When prompted to load more HBA drivers, insert the driver disk, then select Yes. (To load
4
more HBA drivers, repeat this step.)
When all drivers have loaded, select No.
5
Complete the UnixWare installation, following the instructions included with your
6
operating system.
Continue with
7

Installing with Solaris

Note:
This task is not necessary if you are installing Solaris 10 Update 2 or later. Instead, you
can choose to install Solaris using the in-box driver and update it either during or after the
installation is complete, if required. You will need a floppy disk to complete this task.
To create a driver disk:
Start your computer.
1
Interrupt the autoboot, press the ESC key. The Device Configuration Assistant (DCA)
2
Utility will open.
Select F4_Add Driver.
3
Insert a floppy disk.
4
Complete the Solaris installation, following the instructions included with your operating
5
system.
Chapter 7: Installing the Driver and an Operating System
Managing Your Storage Space on page
Managing Your Storage Space on page
59.
59.
52
●