Checking The Battery Level - Orbea RISE 2021 Quick Start Manual

6 | OR BEA
ORBEA RS RANGE EXTENDER
To charge the Range Extender, plug the charger to the
mains outlet. With the charger not being connected to the
bicycle the LED on the charger´s body will blink in green.
Remove the Range Extender connection cable from the
Range Extender charging point by pressing on the lower
tab of the charging port and connect the charger to the
Range Extender.
The LED on the charger´s body will show a permanent red
light while the battery is being charged.
QUICKSTART GUI DE
When the battery is fully charged, the charger´s LED will
blink in green to let you know that the charge is complet-
ed.
While the Range Extender is charging, the charge level in-
dicator LEDs will show the current battery level.
When the battery is fully charged, disconnect the charger
by pressing on the lower tab of the charging port and care-
fully pulling from the charger´s cable.
R ISE · RISE 2021
0 4 C H EC K I NG
TH E BATTE RY L EV E L
SHIMANO EW-EN100 JUNTION
With the bicycle on, the Shimano EW-EN100 junction will
show in the LED1 the remaining battery charge of the
battery(ies). The LED1 will display a green light until the
battery charge is below 21%, after which the LED1 will
show a red light. When the battery is almost depleted, the
LED1 will blink in red.
SHIMANO SC-EM800 DISPLAY
(OPTION)
In assemblies with the Shimano SC-EM800 display, the
battery(ies) charge level will be shown on the screen.
COMPATIBLE GARMIN UNITS.
ORBEA RS TOOLBOX
The Orbea RS Toolbox data field for Garmin units allows
you to access relevant information of your Rise, like the
remaining battery level, which is shown as a percentage of
the total capacity of the system.
ORB EA | 7
If during an activity the battery level is not visible on Or-
bea RS Toolbox, the battery level percentage will be visible
again when the battery level drops by 1%. At that moment,
the EP8 system will communicate the battery level via
ANT+ to the Garmin unit and the battery level will be dis-
played.
Read how to download and install the Orbea RS Toolbox
data field on your compatible Garmin unit in the dedicated
section of this manual
ORBEA RS BATTERIES
Press and hold for 1 second the main button of the Orbea
RS battery (internal battery or Range Extender) for the re-
maining battery level to be displayed.
The LED lights will show the remaining charge in 25% in-
crements.
EN