Linux - Adaptec RAID 2120S Installation Manual

Adaptec SCSI RAID 2120S/2200S Installation Guide

Linux

The Adaptec SCSI RAID controller supports Red Hat 7.2 and 7.3, and
SuSE 7.3 and 8.0.
Note: For the most up-to-date information on Adaptec's
support of Linux, or to download driver sources, visit
http://linux.adaptec.com
Installing the Driver to an Existing Linux System
The Adaptec SCSI RAID Installation CD contains precompiled
module drivers and storage management software in RPM (Red
Hat Package Manager) format. For current information, visit
http://linux.adaptec.com
The 2.0 driver RPM has precompiled module drivers for the
following kernels:
Vendor
Red Hat
SuSE
Note: Kernel versions not listed may have the drivers already
embedded. In those cases where the drivers are not available,
you may need to create a custom driver.
To add the driver to a supported Linux system:
1 Ensure the CD-ROM drive is mounted, then install the driver
RPM. This can be done by typing:
rpm -Uvh <mount-point>/packages/Linux/
driver_package/aacraid-0.9.10-27D.i386.rpm
2 Run ,
fdisk mkfs
3-10
.
.
Version
7.3
7.2
8.0
7.3
, and create mount points for any new drives.
Kernel Version
2.4.18-3
2.4.9-11
2.4.18
2.4.10