Juniper SRX300 Hardware Manual page 63

Options
Internet zone configuration options
Internal zone service configuration
Internal destination NAT configuration
NOTE: If you change the IP address of the port to which the laptop is connected, you might
lose connectivity to the device when applying the configuration in the Guided Setup mode.
To access J-Web again, open a new browser window and type https://new IP address.
Default Setup (uses a dynamic IP address)—Enables you to quickly set up the SRX300 with the default
configuration. Any additional configuration can be done after the wizard setup is completed.
High Availability—Enables you to set up a chassis cluster with a default basic configuration.
Basic
Static IP
Dynamic IP
Allowed
Not Allowed
Expert
Static IP
Static pool
Dynamic IP
Allowed
Allowed
63