Juniper SRX300 Hardware Manual page 19

Table 3: SRX300 Services Gateway Front Panel Components (continued)
Number Component
6 Mini-USB console port
7 USB port
8 LEDs
9 Power button
Figure 2 on page 19 shows the LEDs on the front panel.
Figure 2: SRX300 Services Gateway Front Panel LEDs
Table 4 on page 20 lists the front panel LEDs.
Description
Connects a laptop to the services gateway for CLI
management through a USB interface. The port accepts
a Mini-B type USB cable plug. A USB cable with Mini-B
and Type A USB plugs is supplied with the services
gateway.
To use the mini-USB console port, you must download
a USB driver to the management device from the
Downloads page at
https://www.juniper.net/support/downloads/?p=junos-srx#sw.
To download the driver for Windows OS, select 6.5
from the Version drop-down list.
To download the driver for Mac OS, select 4.10 from
the Version drop-down list.
The services gateway has one USB port that accepts a
USB storage device.
Indicates component and system status at a glance.
Use the Power button to power on or power off the
services gateway.
19