Removing The Jig From The Docking - Kreg 700 Series Owner's Manual

Removing the Jig from the Docking Station
If you use the 700-Series Jig with the optional docking station, you can remove the
jig from the docking station at any time.
Removing a Kreg 700-Series Jig from a Mounted Docking Station
With the jig handle (1) facing you, slide the jig (A) toward you until the jig (A)
disengages from the dock adapters (H). Then lift the jig (A) off the dock
adapters (H).
1
A
H
19