Using Your Kreg Jig - Kreg 700 Series Owner's Manual

Using Your Kreg Jig

Your Kreg Jig has been designed to work in either a vertical or horizontal orientation
to accommodate your workpiece.
To switch from one orientation to the other, simply rotate the jig 90 degrees.
In either orientation, you can use the pocket-hole jig clamp (O) to secure the jig in
place on your workbench.
Orientation
Vertical
Horizontal
1
18
Description
Tool-storage side (1) is vertical
Tool-storage side (1) is face-down
O
Vertical
Clamp Position Options
One available clamp position (2)
Two available clamp positions (3, 4)
2
1
3
O
Horizontal
4