Operating Procedure In Normal Condition - Siemens RAJA+ ЗTE7111-2SC18-1A Series Installation, Maintenance & Troubleshooting Manual

Installation, Maintenance & Troubleshooting guide | Version 01

1.5: Operating procedure in normal condition

Table: 4 ADOL operating sequence in normal condition
1A 1B 1C
LMR-A 3 Amber
Mode main LED
supply indication
Blink
Manual ON (On-delay
duration)
Blink
Auto ON (On-delay
duration)
Blink
Bypass ON (On-delay
duration)
Starter operation:
LMR-A: Manual mode
1A : Keep the LMR-A in Manual mode.
1B : Switch ON 3-Phase incoming main supply.
1C : Amber LED will start blinking for a period of min 0.5 min.
1D : 0.5 min is the default setting which can vary from min 0.5 min to max.5min.
1E : After the ON-delay duration, amber LED will ON continously indicating that the incoming supply
is Healthy (Assuming incoming supply is healthy).
1F : Press the green push putton for switching ON the starter.
1G : Starter gets switched ON.
1H : Press the red push button for switching OFF the starter.
1I : Starter gets switched OFF.
1J : Amber LED indication remains continous ON.
1K : Switch OFF the 3-phase incoming main supply.
1L : Amber LED indication gets turned OFF indicating that there is no incoming main supply.
LMR-A: Auto mode
1A : Keep the LMR-A in Auto mode.
1B : Switch ON the 3-Phase incoming main supply.
1C : Amber LED will start blinking for a period of min 0.5 min.
1D : 0.5 min is the default setting which can vary from min 0.5 min to max.5min.
1E : After the ON-delay duration, amber LED will ON continously indicating that the incoming supply is
healthy(Assuming incoming supply is healthy).
1F : Not applicable (No need to press ON push button)
1G : Starter gets switched ON automatically.
1H : Press the red push button and lock by mechanical latch for switching OFF the starter.
1I : Starter gets switched OFF.
1J : Amber LED indication remains continous ON.
1K : Switch OFF the 3-phase incoming main supply.
1L : Amber LED indication gets turned OFF indicating that there is no incoming main supply.
1D 1E
On- Amber
Delay LED
button
0.5- ON
5min
0.5- ON
5min
0.5- ON
5min
ON operation
1F 1G 1H
'ON' Starter 'OFF'
Push Operation Push
button
ON ON OFF
ON ON Lock
ON ON OFF
1I 1J 1K
Starter Amber 3
Operation LED main
supply
OFF ON OFF
OFF ON OFF
OFF ON
OFF
OFF operation
1L
Amber
LED
indication
OFF
OFF
OFF
10