Table of Contents
Advertisement
6. USER INTERFACE GUIDE
6.1. Keypad layout
6.2. Menu map
Check the status of the USB ports.
Check the status of the 12V port.
WRENCH. Goes to the Service menu. It should only be used by technicians.
LOCK. Goes to the activation menu.
CHECK.
Shows the level of illumination of the panel. This is not an absolute value but mainly a relative indicator to help
find the optimal position.
Shows an approximation of the state of charge of the battery (in %).
Displays the number of days left in the device before activation expires. If the device is fully activated, it is
shown as such.
Page 9
SHS 200 MPPT
USER INTERFACE GUIDE
Advertisement
Table of Contents
