Table of Contents
Advertisement
5 Operation
5.1 Precautions
Before starting work, make sure that the safety instructions in the chapter
Introduction and Safety
WARNING: Crush Hazard
Risk of automatic restart.
CAUTION:
Do not exceed the maximum working pressure of the pump.
This information is listed on the nameplate of the pump.
5.2 Requirements
Before starting the pump, follow all the instructions in the chapter
page 10.
The pump must be vented fully.
The minimum suction pressure for the pump must be set as given in the table
Minimum suction pressure
5.3 Start the pump
Turn on the power supply.
On the user interface, the blinking yellow light shows that the pump has
started.
5.4 Operating modes
The user interface has the following operating modes:
Position
Ecocirc+ 20-18 Installation, Operation, and Maintenance Manual
on page 3 have been read and understood.
on page 31.
Operating mode
Standby
LED status
Description
Blinks yellow
The pump is on standby
5 Operation
Installation
on
21
Hide quick links:
Advertisement
Table of Contents
