Configuring The Scsi Card 1505 With Scsiselect - Adaptec AVA-1505A User Reference Manual

SCSI Card 1505 User's Reference
Configuring the SCSI Card
1505 with SCSISelect
®
SCSISelect , included with the SCSI Card 1505, enables you to
change SCSI settings without opening the computer or handling the
card. SCSISelect also enables you to low-level format or verify the
disk media of your SCSI hard disk drives. Table 2 lists the available
and default settings for each SCSISelect option.
Note:
The default settings are appropriate for most systems.
Run SCSISelect if you need to change or view current set-
tings, or if you would like to run the SCSI disk utilities. See
the descriptions of each option on page 14 and 15.
Host Adapter Interface Definitions
Host Adapter Interrupt (IRQ) Channel
Host Adapter DMA Channel
Host Adapter SCSI ID
SCSI Channel Interface Definitions
SCSI Parity Checking
Host Adapter SCSI Termination
Additional Options: SCSI Device
Configuration
Initiate Sync Negotiation
Maximum Sync Transfer Rate (MB/sec)
Enable Disconnection
Additional Options: Advanced Configuration
ISA Plug and Play Mode
Plug and Play SCAM Support
12
Table 2. SCSISelect Settings
Available Settings
9, 10, 11, 12
5, ,6, 7 Disabled
0-7
Enabled, Disabled
Automatic
Yes, No
5.00
Yes, No
Enabled, Disabled
Enabled, Disabled
Default Setting
10
Disabled
7
Enabled
Automatic
No (Disabled)
5.00
No (Disabled)
Enabled
Disabled