Table of Contents
Advertisement
If the driver is listed but has an "X" inside a red circle, the
SCSI Card 1505 software driver is disabled and isn't load-
ing (see below).
If the SCSI Controller icon or the SCSI Card 1505 driver is
not listed, reinstall the driver (see below).
Note:
Software upgrades (including downloadable drivers)
for Adaptec products are available on the Adaptec Web Site
at http://www.adaptec.com .
An "X" inside a red circle appears with the SCSI Card 1505 software
driver in Device Manager. What does this mean?
The SCSI Card 1505 software driver is disabled and isn't loading. To
enable the driver:
1
Double-click the SCSI Card 1505 software driver in Device
Manager.
2
Under the General tab, check the Original Configuration (cur-
rent) box.
What if there is no SCSI controller icon under Device Manager, or the
software driver for the SCSI Card 1505 does not appear under Device
Manager?
If the SCSI controllers icon or the software driver do not appear:
1
Double-click the Add New Hardware icon in Control Panel.
2
Select Yes on the second screen of the Add New Hardware
Wizard to have Windows
3
Follow the onscreen instructions.
If Windows 95 does not detect the SCSI card, run the Add New
Hardware Wizard again:
1
Double-click the Add New Hardware icon in Control Panel.
2
Select No on the second screen of the wizard.
3
Select SCSI controllers on the next screen.
4
Select the model of your Adaptec SCSI Card.
®
search for the SCSI Card 1505.
Troubleshooting
5
Advertisement
Table of Contents
