Table of Contents
Advertisement
SCSI Card 1505 User's Reference
Troubleshooting
Have you reviewed the Troubleshooting Checklist provided in the
SCSI Card 1505 Installation Guide? You can resolve most problems by
following the recommendations in the checklist. If you still experi-
ence problems, continue with this section.
Troubleshooting in Windows 95
When I start Windows 95, the system locks up when the Windows logo
is displayed. How can I get the system to start so that I can verify the
SCSI card is functioning normally?
1
Start or restart your computer. View the messages that appear
onscreen.
2
When the message "Starting Windows 95" appears, press and
release the F8 function key while the text is on your screen.
3
From the menu displayed, select Safe Mode. (It may take sev-
eral minutes for Windows 95 to load.)
4
Verify the SCSI Card 1505 software driver is loading properly
(see below).
How can I tell if the SCSI Card 1505 software driver is loading
properly?
1
Click the Start button, point to Settings, then click Control
Panel.
2
Double-click the System icon.
3
Click the Device Manager tab.
4
Double-click the SCSI Controller icon. The driver for the SCSI
Card 1505 is listed as "Adaptec AVA-1505 SCSI Host Adapter."
If the driver is listed, the SCSI Card 1505 driver is loading
properly.
If the driver is listed but has an exclamation mark inside a
yellow circle, the software driver may be in conflict with
other hardware using the same resources. Double-click the
icon to see the device status and possible solutions.
4
Advertisement
Table of Contents
