Configuring The Scsi Card 2906 With Scsiselect - Adaptec AVA-2906 User Reference Manual

Configuring the SCSI Card
2906 with SCSISelect
SCSISelect (included on a separate diskette in your package) enables
you to change SCSISelect settings without opening the computer or
handling the card. SCSISelect also enables you to low-level format or
verify the disk media of your SCSI hard disk drives. Table 2 lists the
available and default settings for each SCSISelect option.
Note:
The default settings are appropriate for most systems.
Run SCSISelect if you need to change or view current set-
tings, or, if you would like to run the SCSI disk utilities. See
the descriptions of each option in SCSI Bus Interface Defini-
tions on page 17.
Table 2. SCSI Select Settings
SCSISelect Option
SCSI Bus Interface
Definitions:
Host Adapter SCSI ID
SCSI Parity Checking
Host Adapter SCSI Termination Automatic,
Additional Options
SCSI Device Configuration:
Initiate Sync Negotiation
Maximum Sync Transfer Rate
Enable Disconnection
Advanced Configuration
Options:
Plug-and-Play SCAM Support
SCSI Card 2906 User's Reference
Available Settings Default
Setting
0-7 7
Enabled, Disabled Enabled
Automatic
Enabled, Disabled
Yes, No Yes
(Enabled)
10.0, 8.0, 6.7, 5.0 10.0
Yes, No Yes
(Enabled)
Enabled, Disabled Disabled
15