Minelab GPX 6000 User Manual page 4

Controls
1
2
3
4
1. Bluetooth® Control
2. Backlight Adjust
3. Power On/Off
4. Sensitivity Adjust
5. Ground Type
6. Noise Cancel
7. Volume Adjust
8. Quick‑Trak
CONTENTS
Enables Bluetooth® for connection of wireless
headphones (page 7)�
Initiates Bluetooth® pairing mode for connecting Bluetooth®
headphones (long press for at least 2�5 s)
Cycles through the backlight brightness settings —
high, medium, low and off�
Turns the detector on and off�
Restores factory default settings (press and hold from
off for at least 7 s) (page 3)�
Adjusts the sensitivity level
Toggles between Difficult and Normal Ground
Type (page 15)�
Toggles between the Threshold On / Off settings
(long press for at least 2�5 s)
Initiates the Noise Cancel process
When a Double‑D coil is connected, toggles between the
Double‑D Modes — EMI Cancel and Conductive Ground
Cancel (long press for at least 2�5 s)
Adjusts the audio Volume Level�
Press and hold Quick‑Trak Ground Balance to conduct a
Ground Balancing operation
4
6
5
(page 7)�
(page 12)�
(page 22)�
(page 13)�
(page 21)�
(page 16)�
7
8