Minelab GPX 6000 User Manual page 6

Battery
The GPX 6000™ is supplied with a lithium‑ion rechargeable battery�
Beginning each detecting session with a fully charged battery is recommended�
The GPX 6000™ battery can be charged using the supplied charging methods:
` The supplied AC plug pack (100 to 240 V AC)
` Typical 12 V DC car or truck systems using the supplied direct battery connection clips�
Press down on the battery locking
lever to release the battery�
Charging the Battery — AC Charger
1. Connect the AC charger plug pack to a powered wall outlet�
2. Plug the charging connector into the charging socket on the top of the battery�
3. The battery charging status LED flash green during charging� When charging is
complete, the charge status LED will remain steady on green�
Charging the Battery — DC Charger
1. Attach the black negative (−) clip to the negative (−) battery terminal�
2.
Attach the red positive (+) clip to the positive (+) battery terminal�
3. Plug the charging connector into the charging socket on the top of the battery�
4. The battery charging status LED flash green during charging� When charging is
complete, the charge status LED will remain steady on green�
Charge Status LED
The charge status of the battery is indicated on the battery decal�
Charging (flashing)
Fully charged (on)
Error
CONTENTS
6