Noise Cancel
If audio responses become erratic due to EMI, initiate the Noise Cancel process to
automatically select a quieter detecting channel�
Noise Cancel Procedure
START `
1. Hold the coil 100 mm (4 in)
above the ground.
2. Press the Noise Cancel button.
3. Wait for confirmation tone
(approximately 5 seconds).
`
Begin detecting.
If the detector is still noisy when using a mono coil, follow the
`
CONTENTS
Hold the coil still and 100 mm (4 in) above, and parallel to the
ground for the duration of the Noise Cancel procedure�
100 mm (4")
Press the Noise Cancel button�
The Noise Cancel icon will flash while Noise Cancel is in progress
(approximately 5 seconds)�
A confirmation tone indicates that Noise Cancel is complete�
Double‑D Coil Noise Cancel Procedure (page
13
14)�