Advertisement
USE AND CARE
Inserting Beaters
1. Unplug the mixer and set the
speed control to the OFF position.
2. Insert beater with collar into larger
hole. Push beater in until it clicks
into place. Insert the beater with-
out collar into the smaller hole.
Push beater in until it clicks
into place.
Cleaning and Removing Beaters
1. Before cleaning the PowerSelect
Mixer, set the speed control switch
to OFF and unplug it from the wall
outlet. Press down on the beater
eject button and remove beaters
from the mixer. Wash the beaters
after each use in hot, soapy water
or in a dishwasher.
2. NEVER PUT THE MOTOR
HOUSING IN WATER OR OTHER
LIQUID TO CLEAN. Wipe with a
damp cloth or sponge. Do not use
abrasive cleansers, which could
scratch the surface.
Collar
4
10ce115573_chm3_ib_recipe.indd 4
QUICK
REFERENCE CHART
Mixing Techniques
™
The PowerSelect
always be set on the lowest speed
when you start mixing.
Speed 1
together
™
doughs
and batters
dry ingredients
Speed 2
Larger
and fluffy
Hole
Speed 3
light and fluffy consistency for dips
Mixer should
and spreads
RECIPES
Mixing Tips
sure all ingredients before beginning
the mixing process.
flour directly from the bag. Pour into
a container or bowl, scoop out the
flour and level with the back of a
knife or spatula. For flour stored in a
container, stir before measuring.
combine more thoroughly at
room temperature.
cut into
out remaining ingredients for recipe.
This will hasten the warming process.
Do not warm butter for baking in a
microwave unless instructed to do so.
Microwaving can melt butter; melted
butter will change the final product.
when the eggs and cream cheese
are a similar room temperature. While
the Cuisinart
mix cold cream cheese, the trick is
-
1
⁄
-inch pieces, then measure
2
®
hand mixer can easily
8/2/10 11:56:20 AM
Advertisement
