Pivot CYBER GAUGE COW User Manual

The Future of Cyber Gauges is Here and Now.
USER' S MANUAL
Thank you for purchasing this PIVOT product.
Please read this manual carefully and keep it for future
reference.
● If this produc t is given to
Product
another user, make sure to
include this User' s Manual.
Contents
Contents / WARNING / CAUTION ...... 1
Features ....................................... 1
Part Names and Displays .................. 2
Connecting The Wires ............... 2 ~3
Installing The Product........................ 3
Basic Operation .............................. 4
Switching The Display and Setting ...... 4
Troubleshooting .............................. 4
1. The display will not be proper if the ECU being used is not the standard one or if a sub-computer is being used, even
in compatible car models.
2. Cannot be used in combination with other company' s products that use Diagnostic Monitoring Connectors.
3. For details about using combinations of PIVOT OBD2 products, see here.
Improper use or disregard of these warnings
WARNING
may result in the injury or death of people.
●Do not work in areas where there is excessive exhaust.
Due to vehicle exhaust emission poisoning or fire may result in a damage to
humans.
●Do not crush the cable.
Please be careful that the cable does not get crushed by the seat rail or car
door steel plate, nor cut by any sharp steel plate as this may cause a poor
connection or an electric short leading to fire or other danger.
●Do not operate while driving.
Operating or checking the display during driving may cause an accident; please
use with the utmost consideration for safety.
●Please securely fasten the product to a stable place and be
sure to store bundle away all wires with tape, etc...
It is very dangerous to pull tangled wires by force or allow tangled wires to
interfere with driving.
Features
Easy-to-Install OBD Connection Models
Simple Coupler Connection to Diagnostic Monitor Connector
(Please check compatible car models with the Fitting List)
Low Position Holder
New meter gauge holder allows for installation at 5 mm lower
than normal.
Illumination
White LED lighting of Dial and Needle.
＋
Please check the contents of the package
Meter
Need to purchase separately sold OBD unit (COU) to operate meter.
The contents of the OBD unit package
OBD Unit
●This product is for DC12V cars;
●Just after installation do not exert any strong force on the product.
●Do Not Use Chemical Cleansers.
●Do not install the product in any place subject to high temperature or
●Make sure to replace all screws and parts to their original place.
●Do not install the product in a place where it will cause distraction.
●Do not, in any manner, process, take apart, or make changes to this
CYBER GAUGE
Gauge Meter Allen
Cable Holder Wrench
OBD Cable IGN Cable Double-sided
with fuse 3A with fuse 3A
⇒ https://pivotjp.com/obd-e/
Improper use or disregard of these warnings may cause
CAUTION
injury to persons, damage the product and other things.
Installation cannot be carried out on cars with other voltage batteries.
Please note that it's easy to unstick just after fixing the product with double-sided tape.
If the unit gets dirty please wipe with a soft cloth to remove any dirt. Do not use
chemical cleansers such as thinner, benzene, or alcohol.
any place where water may be splashed.
product.
Warning and Peak reading
Blinks red LED at the set value as Warning and the Peak reading.
Stepping Drive
Our stepping motor is able to provide a smooth, highly precise
display.
Linkage Possible
For a sleek one-line connection from multiple gauges to unit use
our link cable (sold separately).
（COB / COW / COV / COT As of May, 2015 No.3)
OBD or SENSOR SYSTEM
OBD Connection
cob
BOOST
cow
WATER TEMP
coV
VOLTAGE
coT
TACHOMETER
coU
OBD UNIT
User' s
Double-sided Cushion
Manual
Tape Tape
(This Book)
Zip Ties Cut
Tape (Large) × 2 Connectors
(Small) × 5 × 2
1