Installing Scsi Devices - Adaptec AHA-2940UW/OF User Manual

AHA-2940UW/OF and AHA-2944UW/OF User's Guide
3
Insert the host adapter in a 32-bit or 64-bit PCI expansion slot.
Press it down firmly so that the contacts are securely seated in
the slot and secure it with the screw that you removed in
Step 2.

Installing SCSI Devices

Make sure that all SCSI devices have unique SCSI ID's. (Refer to
your device documentation for SCSI ID settings and instructions on
manually changing the default settings.
Note:
If your computer comes with preterminated SCSI
cables, leave all devices unterminated.
Make sure that you connect only single-ended SCSI devices to the
AHA-2940UW/OF and only differential SCSI devices to the
AHA-2944UW/OF.
1
When narrow 50 pin SCSI devices are connected, the SCSI ID of the host
adapter should be set to 7.
2-4
Figure 2-4. Host Adapter Installation
1
)