Adaptec AHA-2940UW/OF User Manual page 46

AHA-2940UW/OF and AHA-2944UW/OF User's Guide
I
Initial program load data
ipldata.fc A-1
Initial program load data
settings A-1, A-3
BIOS control A-2
bus release time A-3
host adapter SCSI ID A-3
maximum # of devices A-3
SCSI ID configuration flags A-1
Initiate sync negotiation 3-8
Initiate wide negotiation 3-9
Installation
device driver (v.2.0) 2-9
external SCSI devices 2-8
host adapter 2-3
internal SCSI devices 2-5
troubleshooting 2-12
M
Maximum # of devices A-3
settings A-5
Maximum sync transfer rate
option 3-8
N
note, explanation of 1-3
P
P1275 user interface 3-1
Pin
gnd/rext A-4
wideps# A-4
Power connection
to SCSI devices 2-7
Properties command 3-2
pwd command 3-2
Index-2
R
Release information for device 3-2
Reset initialization
default data adjustments A-4
host adapter control A-4
SCSI ID configuration flags A-4
Reset SCSI bus at host adapter
initialization option 3-9
ROM monitor, See OK prompt
S
SCSI channel interface,
configuring 3-6
SCSI device configuration 3-8
SCSI disk utilities 3-10
format SCSI disk utility 3-13
target selection screen,
illustrated 3-10
verify SCSI disk media
utility 3-12
SCSI ID configuration flags A-1, A-4
wide setting A-4
SCSI parity checking option 3-6
SCSISelect
configure/view host adapter
settings 3-3
enable disconnection 3-9
executing 3-2
host adapter SCSI ID 3-6
host adapter SCSI
termination 3-7
illustrated options 3-2
initiate sync negotiation 3-8
initiate wide negotiation 3-9
maximum sync transfer rate 3-8
reset SCSI bus at host adapter
initialization 3-9
SCSI disk utilities 3-10
SCSI parity checking 3-6
See also individual options by
name