Advertisement
Quick Links
Advertisement
Related Manuals for EarFun Free Pro
Summary of Contents for EarFun Free Pro
- Page 1 EarFun Free Pro ANC Wireless Earbuds...
- Page 3 What’s in the Box EarFun Free Pro Charging Case Ear Tips (XS, S, M, L) User Manual Ear Hooks（S, M, L） USB-C Cable Product Diagram Touch multifunction control LED indicator Microphone Charging contactor Charging case Charging dock Charging case indicator...
- Page 4 Charging 1.Open or close the charging case to activate the LED battery indicator. 2.Remove the film on the earbuds when taking them out of the charging case for the first time. 3.Fully charge both the earbuds and the charging case before the first-time use 4.The charging case must be close that earbuds can start charging.
-
Page 5: Specifications
Specifications Bluetooth frequency 2.402GHz-2.48GHz Bluetooth profile A2DP, AVRCP, HFP Maximum working range 15m(without obstacle) Battery capacity 50mAh x 2(earbuds); 400mAh(charging case) 1hour(for earbuds); 2 hours(for charging case via USB-C); Charging time 3.5 hours(for charging case via wireless charger) Up to 7 hours, Totally 32 hours with the charging case; Playtime (varies by volume level and audio content) Input... - Page 6 Step 1: Open the charging case, earbuds will automatically power on and enter into pairing mode. Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices. Step 3: Select “EarFun Free Pro” from the list of Bluetooth devices shown (if a password is needed, type ‘0000’). EarFun Free Pro Notes: The earbuds will automatically connect with the device they were last paired with when the case is open.
- Page 7 Step 1. Make sure earbuds are power on, and then touch and hold the both earbuds touch button at the same time for at least 3s until flash the blue, the earbuds will into pairing mode. Step 2. Search on the new device and connect. EarFun Free Pro Functions Power on/off Open the charging case, the earbuds will automatically power on.
- Page 8 Volume up Tap once (R) Volume down Tap once (L) Hands free conversation Answer/End a call Tap twice (L/R) Reject a call Tap and hold for 2s (L/R) Answer and transfer two calls Tap triple (L/R) Activate the voice assistant Voice assistant Tap and hold for 2 seconds (R)
- Page 9 2. Keep the charging case open, then touch and hold the button on each earbud at the same time for at least 10s until they flash in purple then earbuds have been reset successfully. 3. Delete the old connection from the Bluetooth device and reconnect “EarFun Free Pro”. ＞10...
-
Page 10: Troubleshooting
A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select ’EarFun Free Pro’ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support. -
Page 11: Fcc Statement
FCC Statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 12: Eu Declaration Of Conformity
Other trademarks and trade names are those of their respective owners. EU Declaration of Conformity EarFun Technologh(HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive. The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com...