Advertisement
Advertisement
Table of Contents
Related Manuals for EarFun Air Pro 3
Summary of Contents for EarFun Air Pro 3
- Page 1 EarFun Air Pro 3...
-
Page 3: Product Diagram
What’s in the Box EarFun Air Pro 3 Charging Case 4 x Ear Tips A 4 x Ear Tips B User Manual USB-C Cable Product Diagram Touch control zone Earbuds LED indicator Microphone Charging contactor USB-C charging port Charging case... - Page 4 Charging 1. Remove the insulating film on the earbuds before using this device. Insulating film 2. Fully dry off the earbuds and the USB port before charging. 3. Open or close the charging case to activate the case battery level LED indicator. 4.
-
Page 5: Specifications
Specifications Bluetooth version V5.3 Bluetooth frequency 2.402GHz-2.480GHz Bluetooth profile A2DP, AVRCP, HFP, HSP Bluetooth transmitted power <7dBm (for EU) Maximum working range 15m(without obstacles) Battery capacity 54mAh x 2(earbuds); 520mAh(charging case) 1 hour(for earbuds); Charging time 2 hours(for charging case via USB-C); 3.5 hours(for charging case via wireless charger) ANC OFF-Up to 9 hours, Totally 40 hours with the charging case;... - Page 6 Step 1: Open the charging case, and the earbuds will automatically power on and enter into pairing mode. Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices. Step 3: Select “EarFun Air Pro 3” from the list of Bluetooth devices shown (if a password is needed, type ‘0000’).
- Page 7 EarFun Air Pro 3 3. Pairing and Connecting two Bluetooth devices simultaneously Step1. Pair with the first device and stay connected. Step2. Keep the earbuds in the charging case, then press and hold the reset button for 3 seconds until the LED indicator on earbuds flash blue rapidly, and then the earbuds enter pairing mode and will disconnected from the first device.
- Page 8 Power on Power off Note: If the earbuds are not connected to any device, they will automatically power off after 10 minutes for saving the battery life. Playing music Play/Pause Tap twice (L/R) Previous track Next track Tap triple (L) Tap triple (R) Volume down Volume up...
- Page 9 2. Keep the charging case open, then press and hold the reset button for at least 8s until both earbuds flash in purple, then earbuds have been reset successfully. 3. Delete the previous connection from the Bluetooth device and reconnect “EarFun Air Pro 3”.
-
Page 10: Troubleshooting
A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first,then select ’EarFun Air Pro 3’ on the Bluetooth list to get paired. If the earbuds still can’t connect to your device, please try to reset it, or contact our customer support. - Page 11 Q: Will the earbuds shut off automatically? A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 10 minutes.
-
Page 12: Fcc Statement
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. -
Page 13: Eu Declaration Of Conformity
Other trademarks and trade names are those of their respective owners. EU Declaration of Conformity Earfun Technology (HK) Limited hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/ 65/EU Directive. - Page 14 MODEL: TW500 FCC ID: 2AVIT-TW500 xxx-xxxxxx...