EarFun Air Manual

How to Fit

Note:

1. Please choose the suitable eartip for the best sound and secure fit.
2. Selectthe left or right earbud and insert to the corresponding ear.
3. Rotate the earbud back and forth for the eartip to create a comfortable seal

What's in the Box

Product Diagram

1. Touch control zone
2. Earbuds LED indicator
3. Microphone
4. Charging case button
5. Charging contactor
6. USB-C charging port
7. Charging case
8. Battery indicator

Pairing Your Earbuds

First-time Pairing with Device

Step 1.
Remove the insulating film on both earbuds.

Step 2.
Put both earbuds back into the charging case and close the charging case

Step 3.
Open the charging case and the earbuds will automatically power on and go into pairing mode

Step 4.
Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices

Step 5.
Select "EarFun Air" from the list of Bluetooth devices shown (if a password is requested, type '0000'.)

Notes:

• The earbuds will automatically connect with the previously paired device when the case is open.
• Each earbud can be used independently.

Connect to a New Device

Step1.
Put both earbuds back into the charging case and make sure they are being charged. Keep the lid open - then press and hold the button on the case for 3 seconds until the LED indicators on earbuds start flashing blue rapidly

Step 2.
Search on the new device and connect.

Functions

Note: If the earbuds are not connected to any device, they will automatically power off after 10 minutes for saving the battery life.

Playing music

Hands free conversation

Answer/ End a call

Reject a call

Answer and transfer two calls

Activate the voice assistant

Voice assistant

Game Mode

Game Mode ON/OFF

Note:

• Turning on the game mode can drop latency to as low as 100ms and improve the gaming and video experience, but it will shorten the connection distance. We suggest you turn off the game mode when you use the earbuds for music
• The normal mode provides latency about 200ms.
• Bluetooth technology can't eliminate latency.

Earbuds LED Indicator

Reset and Reconnecting

If you fail to establish a connection between two earbuds or between the earbuds and Bluetooth devices, please try the following steps:

1. Put both earbuds into the charging case.
2. Keep the charging case open, then press and hold the reset button for at least 8s until both earbuds flash purple. The earbuds have been reset successfully reset.
3. Delete the previous connection from the Bluetooth device and reactivate Bluetooth to reconnect "EarFun Air"

Charging

1. Dry the earbuds, charging contactors and USB port completely before charging.
2. Open or close the charging case to activate the case battery level LED indicator.
3. put earbuds back into the charging case and the earbuds will start charging.
4. Fully charge both the earbuds and the charging case before first use.

Connect USB-C cable for charging

Wireless charging supported

Specifications

Bluetooth frequency	2.402GHz-2.480GHz
Bluetooth transmitted power	<7dBm (for EU)
Bluetooth profile	A2DP, AVRCP, HFP, HSP
Maximum working range	15m (without obstacles)
Battery capacity	45mAh x 2(earbuds), 500mAh (charging case)
Charging time	1.5 hour (for earbuds), 2 hours (for charging case via USB-C), 3.5 hours (for charging case via wireless charger)
Playtime	Up to 7 hours, Totally 35 hours with the charging case, (varies by volume level and audio content)
Input	5V 1A
Dimensions	57.4mm x 32.5mm x 51.8mm
Weight	53g

Troubleshooting

Q: Can use both earphones separately?
A: Yes, each earbud can be used independently.

Q:The earphones are turning on, but it doesn't connect to my device?
A: To connect the earbuds to your device, please ensure the insulating films on both earbuds were removed first, then check if the Bluetooth is enabled on the device first, then select "EarFun Air" on the Bluetooth list for pairing If the earbuds still don't connect to your device, please perform a reset or contact our customer support.

Q: Why is the connection not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device and make sure there is no radio or WIFI Interference nearby.

Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle) However, the actual range will depend on usage and environment.

Q: Is there volume control on the earphones?
A: Yes, lx tap on the left ear bud decreases the volume and lx tap on the right earbud increases it.

Q My earphones Will not switch on
A: Please recharge them and make sure they have enough battery power. If they are fully charged and still nothing happens or if you are not able to charge them, please contact our customer support.

Q: Is the charging case waterproof?
A: No, the earbuds are sweat and waterproof but the charging case is not.

Q: Will the earbuds shut off automatically?
A: The earbuds will stay on as long as they are connected to a device If no audio is playing, they will enter power-saving mode and wake up once audio playback resumes. If the earbuds are not connected to any devices they will automatically power off after 10 minutes.

Customer Service

For FAQS and more information:
Please send an email to: service@myearfun.com

www.myearfun.com

Documents / Resources

References

• EarFun Official Website | Better Sound. Better Life

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EarFun Air Manual