Page 4
3. Open or close the charging case to activate the case battery level LED indicator. 4. Place earbuds back into the charging case and the earbuds will start charging. 5. Fully charge both the earbuds and the charging case before the first-time usage. Open the charging case, then toggle Remove the insulating film the top of handle to take out the earbud...
Specifications V5.2 Bluetooth version 2.402GHz-2.480GHz Bluetooth frequency <7dBm (for EU) Bluetooth transmitted power A2DP, AVRCP, HFP, HSP Bluetooth profile Maximum working range 15m(without obstacle) Battery capacity 35mAh x 2(earbuds); 380mA(charging case) 1 hour(for earbuds); 2 hours(for charging case via USB-C); Charging time 4 hours(for charging case via wireless charger) ANC OFF--Up to 6 hours, Totally 24 hours with the...
Page 6
Step 2: Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices. Step 3: Select "EarFun Air Pro SV" from the list of Bluetooth devices shown (if a password is needed, type '0000'). Notes: •...
Page 7
OptionB Make sure the earbuds are powered on, then touch and hold the Step 1: both earbuds button at the same time for at least 3 seconds until they flash in blue light, after that the earbuds will enter into pairing mode. Step 2: Search on the new device and connect.
Page 8
Note: If the earbuds are not connected to any device, they will automatically power off after 30 minutes for saving the battery life. Playing music ,---►/II Play/Pause Tap twice (l/R) --.i • x3 Next track Tap triple (R) , ---t x , Volume up Tap once (R) •...
Page 9
CJ1!oi- - - - t� �L. Answer and transfer Taptriple(L/R) two calls Activate The Voice Assistant Voice assistant Tap and hold for 2 seconds (R) •1 1 1•1• Noise cancelling control ---r 2s Noise cancelling/ Tap and hold for 2 seconds (L) Ambient sound/ Normal GameMode...
Page 10
2.ln power-off mode, touch and hold the button on each earbud at the same time for at least 10 seconds until they flash alternately in blue and white, then earbuds have been reset successfully. 3.Delete the old connection from the Bluetooth device and reconnect "EarFun Air Pro SV".
Bluetooth of the device is on at first, then select 'EarFun Air Pro SV' on the Bluetooth list to get paired. If the earbuds still can't connect to your device, please try to reset it, or contact our customer support.
Need help?
Do you have a question about the Air Pro SV and is the answer not in the manual?
Questions and answers