EarFun Air Pro 2 Manual

EarFun Audio app

Download the EarFun Audio app for an enhanced experience.

• Equalizer tuning, custom controls
• Firmware update, earbuds battery status
• Less data tracking, personalized device name
• Built-in feedback, and more

How to Fit

Note:

1. Please choose the suitable eartip for the best sound and secure fit.
2. Selectthe left or right earbud, and insert to the corresponding ear.
3. Rotate the earbud back and forth for the eartip to create a comfortable seal.

What's in the Box

Product Diagram

1. Touch control zone
2. Earbuds LED indicator
3. Microphone
4. Charging contactor
5. USB-C charging port
6. Charging case
7. Charging case button
8. Charging dock
9. Charging case indicator

Pairing Your Earbuds

First-time Pairing With Device

1. Open the charging case, the earbuds will automatically power on and enter into pairing mode.
2. Activate Bluetooth on your Bluetooth-enabled device and search for other Bluetooth devices.
3. Select "EarFun Air Pro2" from the list of Bluetooth devices shown
   (if a password is needed, type '0000')
   

Notes:

• The earbuds will automatically connect with the device they were last paired with when the case is open.
• Each earbud could be used independently.

Connect to a New Device

Option A

1. Unpair the earbuds from the Bluetooth-enabled device that's connected. The earbuds will disconnect from the current device and enter into pairing mode for another pair.
2. Search on the new device and connect.
   

Option B

1. Place both earbuds back into the charging case and make sure they are being charged, keep the cover open and then press and hold the charging case button for 2 seconds until the LED indicator on both earbuds flash in blue rapidly.
2. Search on the new device and connect.
   

Functions

Notes: If the earbuds is not connected to any device, it will automatically power off after 10 minutes for save the battery life

Earbuds LED Indicator

Reset and Reconnecting

If you fail to build connection between two earbuds, or between earbuds and Bluetooth device, please try the following steps:

1. Place both earbuds into the charging case.
2. Keep the charging case open, then press and hold the charging case button for at least 8s until both earbuds flash in purple, then earbuds have been reset successfully.
3. Delete the old connection from the Bluetooth device and reconnect "EarFun Air Pro 2".

Charging

1. Open or close the charging case to activate the LED battery indicator.
   
2. Remove the insulating film on the charging case for the first time.
   
3. Fully charge both the earbuds and the charging case before the first-time usage.
4. Place earbuds back into the charging case and the earbuds will start charging.
5. Fully dry off the earbuds and the USB port before charging.
   • Connect USB-C cable for charging
     
   • Wireless charging (not included)

Specifications

Troubleshooting

Q: Can I use both earphones separately?
A: Yes, each earbud could be used independently.

Q: The earphones are turning on, but it doesn't connect to my device?
A: To connect the earbuds to your device, please check if the Bluetooth of the device is on at first, then select 'EarFun Air Pro 2' on the Bluetooth list to get paired. If the earbuds still can't connect to your device, please try to reset it, or contact our customer support.

Q: Why the connection is not stable and cuts out intermittently?
A: Please make sure there are no objects between the earphones and your Bluetooth device, and make sure there is no radio or WIFI interference nearby.

Q: What is the range of Bluetooth earphones?
A: Bluetooth earphones have maximum range of 49 feet (15m, no obstacle). However, the actual range will depend on usage and environment.

Q: Is there volume control on the earphones?
A: Yes, touch L earbud once decreases the volume and touch R once could increase it.

Q: My earphones will not switch on.
A: Please recharge it and make sure it has enough battery power. If it is fully charged and still nothing happens or if you are not able to charge the unit, please contact our customer support for warranty cover.

Q: Is the charging case waterproof?
A: No, the earbuds are IPX5 sweat & waterproof, but the charging case is not waterproof.

Q: Will the earbuds shut off automatically?
A: The earbuds will remain on as long as they are connected to a device. If no audio is in use, they will enter power-saving mode and wake up once audio is played. If the earbuds are not connected with any devices, they will automatically shut off in 10 minutes.

Customer Service
For FAQS and more information
Please Email to: service@myearfun.com
www.myearfun.com