Liko LikoScale 400 User Manual

LikoScale™ 400
Accessory
User Guide*
Prod. No. 3156226
LikoScale 400 is a convenient, easy-to-use scale that is intended for weighing patients in Liko mobile or stationary lifts.
Together with Liko's lifts and lifting accessories, LikoScale 400 enables safe and easy weighing.
The weight is shown on the scale's digital display. By selecting unit mode the scale can display either kg or lbs.
The scale should only be used in combination with approved lifts and accessories in accordance with the instructions in this
guide.
LikoScale 400 accessory can be used with the following Liko lifts:
Viking™ mobile lift (S, M, L, XL)
- require Adapter 12 mm, Prod. No. 2016504.
Uno™ mobile lift (all models)
- Uno models with serial numbers from 31825 require
Adapter 12 mm, Prod. No. 2016504.
- Uno models with serial numbers up to 31824 require
Adapter 8 mm, Prod. No. 2016502.
As the lifting height is limited when LikoScale accessory is used in combination with LikoLight™ mobile lift or Viking™ XS
mobile lift, we do not recommend these alternatives.
* This user guide is a complement to the complete documentation issued by the manufacturer of the scale.
The intention with this document is to make it easier for our customers to use LikoScale in combination with Liko's products.
For detailed information regarding the scale we refer you to the manufacturer's Operating and Service Manual (attached).
7EN160276 Rev. 2
ENGLISH
Golvo™ mobile lift (all models)
Likorall™ overhead lift (all models)
Multirall™ overhead lift (all models)
Liko™ MasterLift overhead lift (all models)