Liko Likorall 242 S Instruction Manual
  1. Manuals
  2. Brands
  3. Liko Manuals
  4. Lifting Systems
  5. Likorall 242 S
  6. Instruction manual

Liko Likorall 242 S Instruction Manual

Likorall 242 series; likorall 243 series; likorall 250 series
Hide thumbs Also See for Likorall 242 S:

Advertisement

Table of Contents

See also: Service Manual
Likorall 242 R2R
Likorall is one of the world's most popular overhead 
lift motors. Likorall is designed and developed for 
Liko's complete range of fixed installed and free-
standing lift systems. A Liko lift system is always 
close at hand and easy to use.
All common lifts and transfers can be performed using
Likorall, for instance between bed/wheelchair, to/ from
floor, toilet visits, gait training, and together with
stretchers.
Likorall R2R (room to room) enables the patient to be
moved between two rail systems in separate rooms,
without connecting rails and without making holes over
doors.
In this document, the person being lifted is referred to as the patient, and the person helping is referred to as the caregiver.
 is a warning triangle used for situations which require extra care and attention.
 IMPORTANT!
Read the instruction guide for both the patient lift and lifting accessories before use. Lifting and transferring
a person always involves a certain level of risk. It is important to completely understand the contents of the
instruction guides. The equipment should be used only by trained personnel. Please contact your Liko/Hill-Rom
representative in the event of any uncertainties or questions.
Likorall 242
Product Description
Likorall with the ES designation is prepared for
operation with the wireless HandControl Remote (IR)
and in addition, a Transfer Motor can be connected for
motor driven movement of Likorall ES along the rail.
Likorall S, IRC is prepared for continuous charging
through the railsystem by Liko´s In-Rail charging
system (IRC)
Accessories
A large and complete range of accessories are
available for Likorall, including many different sling
models in several sizes and designs.
Likorall 242/243/250™
Likorall 242 S
Likorall 242 ES
Likorall 242 S R2R
Likorall 242 ES R2R
Likorall 243 ES
Likorall 250 ES
Likorall 250 S, IRC
Likorall 243, 250
Instruction Guide
English
7EN120115-03
2011-06-30
Applies to the following models:
Prod. no. 3122009-3122010
Prod. no. 3122005-3122006
Prod. no. 3122011-3122012
Prod. no. 3122007-3122008
Prod. no.3123001-3123002
Prod. no. 3122501-3122502
Prod. no. 3124050

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Likorall 242 S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Liko Likorall 242 S

Summary of Contents for Liko Likorall 242 S

  • Page 1 It is important to completely understand the contents of the instruction guides. The equipment should be used only by trained personnel. Please contact your Liko/Hill-Rom representative in the event of any uncertainties or questions.

  • Page 2: Table Of Contents

    Likorall complies with the requirements in EN ISO 10535:2006, IEC 60601-1, IEC 60601-1-2, ANSI/AAMI ES60601-1 and CAN/CSA C22.2 no 60601-1. Under no circumstances must the lift be modified. If you have any questions, please contact Liko/Hill-Rom. Particular care must be observed when using strong sources of electromagnetic disturbance, such as diathermy, etc, so that diathermy cables are not positioned on or near the lift.

  • Page 3: Definitions

    Definitions Likorall 1. Connection: hand control 2. Indication: charging 3. End cover 4. Emergency stop 5. Emergency stop cord 6. Emergency lowering/raising (electrical) 7. Outlet for transfer motor/contact rail (exclusively: ES) 8. IR receiver (exclusively: ES) 9. SSP Limit Switch 10.

  • Page 4: Measurements

    *** Lifting interval: the distance between maximum lifting height and minimum lifting height measured in CSP. Assembly Handle reinforcement (exclusively: Likorall 242 S, ES) Press the reinforcement (included in the bag containing the instruction guide) labelled ”Emergency lowering” onto the emergency lowering handle.
  • Page 5 Lifting accessory with quick-release hook (Likorall: 242 R2R, 243 ES, 250 ES) Push down the red catch and connect the quick-release hook to the Q-link. Release and check that the catch locks in order to prevent involuntary unhooking from the Q-link. Read more about Liko´s Quick-release Hook system on page 9.
  • Page 6 Electrical emergency lowering Carriages with adjustable friction brake Hang-up HandControl Hanger Emergency lower by pushing The amount of drag along the rail can be the button on the end cover adjusted on carriages equipped with a When not in use, the hand of the lift. Always ensure that the friction brake.

  • Page 7: Charging The Batteries

    - A green LED-light on the lift indicate that the lift is ready to use. - A yellow LED-light on the lift indicate that the lift has low battery capacity, contact Liko if the problem persist. For more information, please contact your Liko reprecentative or visit our website www.liko.com.

  • Page 8: Transferring From Room To Room

    The transfer is performed in a safe and easy manner, with the aid of separate rail systems for each room. Liko’s R2R system enables linking together two Likorall when transferring from room to room. The actual transfer operation between two rooms is performed with a comfortable transition for the patient from one Likorall to another.

  • Page 9: Maximum Load

    300 kg (660 lbs). In this case, the maximum load of 200 kg (440 lbs) applies to the assembled lift system. Study the markings on the lift and lifting accessories or contact your Liko/Hill-Rom representative if you have any questions.
  • Page 10 These springs are intended for patient weights up to 70 kg (154 lbs). For patient weights up to 100 kg (220 lbs): prod. no. 3156513 (short). Also see the instruction guide for Liko MasterVest, models 60 and 64 or Liko LiftPants model 92, for more information.

  • Page 11: Simple Troubleshooting

    A repeated signal can be heard from   1. Charge the battery immediately. the lift 2. If the lift still does not work properly, please contact Liko/Hill-Rom . The lift stops in the high position 1. Check to ensure that the emergency stop button is not pressed in. 2. Check that the hand control is correctly connected.

  • Page 12: Inspection And Maintenance

    Contact your Liko/Hill-Rom representative for advice and information about product upgrades. Design and Quality by Liko in Sweden Liko is quality certified in accordance with ISO 9001 and its equivalent for the medical device industry, ISO 13485. Liko is also certified in accordance with environmental standard ISO 14001.

This manual is also suitable for:

3122009Likorall 242 es312201031220053122006Likorall 242 s r2r ... Show all

Table of Contents

Save PDF