Liko Vest for StandingShell Instruction Manual
Liko Vest for StandingShell Instruction Manual

Liko Vest for StandingShell Instruction Manual

And teddy vest for standingshell

Advertisement

Quick Links

This instruction guide is valid for Liko Vest for
StandingShell and TeddyVest for StandingShell, but in
the following text we will only use the name Liko Vest
for StandingShell.
The Vest for StandingShell has been developed by
Liko as a special aid for raising a patient who stands
with the aid of a so-called standing shell. Liko Vest for
StandingShell is designed for lifting the patient and
standing shell together in a special way, independent
of the design of the standing shell; i.e., no fixtures or
alterations to the standing shell are required.
The accompanying Leg Harness is applied around
the crotch as an extra safety feature that prevents the
Vest for StandingShell from sliding up.
Once standing, the patient can stand in a standing
frame for the shell or in a standing wheelchair.
In this document, the person being lifted is referred to as the "patient" and the person helping them is referred to
as the "caregiver".
"Caution!" triangles are used to warn of situations that demand extra care and attention.
Before using lifts and lifting accessories, read the instructions for both the sling and the lift that will
be used. Instruction guides can be downloaded, free of charge, at www.liko.com.
Liko Vest for StandingShell™, Mod. 67
TeddyVest for StandingShell™, Mod. 67

Product Description

Liko Vest for StandingShell in size XS and S are
made of a Teddy bear patterned polyester fabric
and this is why these slings are called TeddyVest for
StandingShell. Vest for StandingShell in size M is
made of green polyester.
The Vest for StandingShell is intended for use with
Liko's overhead lifts or our Golvo mobile lift. In some
cases, a combination with Uno or Viking may work
well.
For lifting the patient to and from the standing shell,
an appropriate sling is selected according to the
patient's condition and need for support. In these
instructions, we describe lifting with the help of Liko
SilhouetteSling, a thin and pliable sling that provides
support for the whole body.
Visit our website, www.liko.com, for information and
news about Liko's entire product range.
Instruction Guide
English
7EN160169-03

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vest for StandingShell and is the answer not in the manual?

Questions and answers

Summary of Contents for Liko Vest for StandingShell

  • Page 1 “Caution!” triangles are used to warn of situations that demand extra care and attention. Before using lifts and lifting accessories, read the instructions for both the sling and the lift that will be used. Instruction guides can be downloaded, free of charge, at www.liko.com.
  • Page 2 Procedure Lower the patient in such a way that his/her feet and Lay the Vest for StandingShell on the floor and place legs will be correctly positioned in the standing shell. the standing shell on top of the vest, so that its upper Continue lowering carefully until the patient is lying flat, edge is slightly higher than the standing shell’s upper...
  • Page 3 If necessary, of the body if necessary. Make sure there is adequate unhook the loops of the Vest for StandingShell from the head support and that the support straps can move freely in the sling bar hooks.
  • Page 4 EN ISO 10535 requirements. Medical technical Class I product Liko's products are constantly being updated and refined. Liko reserve the right to change aspects of the products without prior notice. Contact your local Liko representative for updated information and advice.

Table of Contents