Disassembly Procedure - YAMADA TOTE IP140S3-TE Manual

ELBOW STAND (TOTE TYPE)
EXPLODED VIEW

DISASSEMBLY PROCEDURE

1. Remove Bolt (Item 3) and Nut (Item 5) from Elbow Stand (Item
12).
2. Remove Flange (Item 9) from Pump Holder (Item 8).
3. Remove Pump Holder (Item 8) from Elbow Stand (Item 12).
3.1 Remove O-Ring (Item 7) from Pump Holder (Item 8).
4. Remove Gasket (Item 10) from Elbow Stand (Item 12).
5. Remove Plug (Item 11) from Elbow Stand (Item 12).
6. To re-assemble TOTE KIT, reverse disassembly
procedure.
- 6 -