Table of Contents
Advertisement
Features
2 Features
6
Following are some features of the S5U13A04B00C Rev. 1.0 Evaluation Board:
• 121-pin PFBGA S1D13A04 Embedded Memory LCD Controller with 160K bytes of
embedded SRAM.
• PCI bus operation through onboard PCI bridge.
• CPU/Bus interface header strips for non-PCI bus operation.
• Configuration options.
• On-board adjustable positive LCD bias power supply from +23V to +40V.
• On-board adjustable negative LCD bias power supply from -14V to -24V.
• Software adjustable backlight intensity support using PWMOUT.
• 4/8-bit 3.3V or 5V single monochrome passive LCD panel support.
• 4/8/16-bit 3.3V or 5V single color passive LCD panel support.
• 9/12/18-bit 3.3V or 5V active matrix TFT LCD panel support.
• Direct interface for 18-bit Epson D-TFD LCD panel support.
• Direct interface for 18-bit Sharp HR-TFT LCD panel support.
• Programmable clock synthesizer to CLKI and CLKI2 for maximum clock flexibility.
• Connector for USB client support.
• Software initiated power save mode.
• Selectable clock source for CLKI and CLKI2.
• External oscillator support for CLKI and CLKI2.
Seiko Epson Corporation
S5U13A04B00C Rev 1.0 Evaluation Board
Rev. 3.1
Advertisement
Table of Contents
