Download Print this page
POWERWINCH PW2000 Instruction Manual

POWERWINCH PW2000 Instruction Manual

Electric winch

Advertisement

Quick Links

Electric winch instructions
manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the PW2000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for POWERWINCH PW2000

  • Page 1 Electric winch instructions manual...
  • Page 2: General Safety Rules

    Thank you for purchasing POWERWINCH – and congratulations on the good choice. We hope that it will be useful for a long time and that each use will be a helpful experience. Read the following manual carefully. Keep it in an easily accessible place near the winch so that you can consult it when in doubt. Follow all the rules when installing the winch, connecting it to the electrical system, and operating it.
  • Page 3 The hook holders must be attached directly to the chassis frame. the rope on the drum under a load of at least 5% of the pulling power, otherwise the top layers may cut into the lower layers, which may damage and permanently wedge the rope together. powerwinch.eu...
  • Page 4: Assembling The Winch

    All moving parts of the winch have been pre-lubricated and do not require rope may break any further maintenance before first use. The steel wire rope requires • The POWERWINCH winches are designed for use on vehicles and periodic lubrication with oil. boats. They are not suitable for industrial applications. •...
  • Page 5 When routing the wires, make sure that they are not placed next to movable parts that may break the insulation or wire. Never place wires on sharp edges that may cut the insulation or wire. Do not let the wires touch surfaces that may get hot. powerwinch.eu...
  • Page 6 7. Turn on the winch power supply using the main switch (jack). sition. Now you can easily unwind the rope from the drum with your hands. 8. Control the winch with the buttons IN and OUT. PW2000 PW3500/4000/4500/6000 Rope Out...
  • Page 7: Using The Wireless Remote Control

    Model C: for wireless XT remote control (without for the winch. the switch) Almost every POWERWINCH winch is equipped with a radio control system as THE SIGNAL LIGHT THE SIGNAL LIGHT standard. If your remote control has been damaged or the transmitter has...
  • Page 8 Keep in mind that we are not able to equip the winch with caution and common sense – these are the features that must come with the user. Thank you for purchasing our winch. We wish you a satisfactory and safe operation. powerwinch.eu...

This manual is also suitable for:

Pw3500Pw4000Pw4500Pw6000Pw12000Pw13000 ... Show all