Warnings And Symbols In These Operating Instructions - honle LED powerline AC/IC 410 Operating Instructions Manual

LED Powerline ACIC

Warnings and symbols in these operating instructions

4
These Operating instructions describe the unit, its operation and possible
applications. They contain safety information and information on danger
points to ensure safe and correct handling of the unit.
The following symbols can be found alongside all safety notices in these
Operating instructions that indicate points where persons may be at risk. An
additional signal word is used to indicate the severity of the potential injury.
Pay close attention to this information and take particular care in these cir-
cumstances to avoid accidents.
DANGER! marks an immediately threatening danger. If it is not avoided,
death or very severe injuries will result. Damage to property is
possible.
WARNING! refers to a potentially dangerous situation. Failure to avoid this
may result in death or serious injury. Material damage is also
possible.
CAUTION! refers to a potentially dangerous situation. Failure to avoid this
may result in minor injuries. Material damage is also possible.
The symbols have the following meaning:
Warning symbol ( general).
This Symbol warns against hot surfaces
This symbol warns against electrical danger.
This symbol warns against UV radiation
The two following symbols are used to address practices for optimal opera-
tion and/or prevention of damage to the equipment. These information are
not related to hazardous situations. Additionally, the signal words
ATTENTION! and NOTE! are used.
ATTENTION!
This symbol and the accompanying signal word appear in
the Operating Instructions in sections where particular at-
tention should be paid in order to prevent the unit being
damaged or destroyed.
NOTE!
This symbol and the accompanying signal word appear
next to notes, tips on usage and helpful information
#078734DE-EN e