Changing The Quartz Glass Plate - honle LED powerline AC/IC 410 Operating Instructions Manual

LED Powerline ACIC
20

5.4. Changing the quartz glass plate

1 Top cover with groove
2
Quartz glass plate with notch
3 Grub screw
1. Insert the quartz glass plate into the groove of the top cover.

Make sure that the notch of quartz glass plate is on the
same side as the grub screws.

The quartz glass plate has to be even with the top cover
when inserted.
2. Apply the screw lock (Loctite 242) to the slot side of the grub screws
(max. 1/3 of total length).
3. Fixate the quartz glass plate with the grub screws in the following
order:
Only hand-tight, max. 0.04 Nm!
#078734DE-EN e